3 Design Elements for Effective Turning on a 5 Axis Machine
Here are three design elements that enable this five-axis machine to effectively turn workpieces, even if they aren’t symmetric.
Share
The rotary table balance control system on this five-axis machine enables 600-rpm turning of non-symmetric parts weighing as much as 8,818 pounds.
I like to use numbered or bullet lists in my articles. These visual tools make it easier for readers to quickly scan an article for relevant information. It also makes the article shorter and easier to digest, in part because there’s no need to include transition sentences taking the reader from one paragraph to the next. Instead, key points are provided in meaningful little portions.
In a recent print article, I wrote about three design elements said to enable the MCT five-axis machine platform from Burkhardt + Weber, part of Industrias Romi SA, to be effective at turning operations. These include:
- Turning tool adapter (Because turning with a tool in the main spindle limits production and damages bearings.)
- Table balance control (Because parts to be turned on a five-axis machine often aren’t symmetric.)
- Thermal isolation system (Because introducing heat isn’t helpful here.)
Related Content
-
The Future of High Feed Milling in Modern Manufacturing
Achieve higher metal removal rates and enhanced predictability with ISCAR’s advanced high-feed milling tools — optimized for today’s competitive global market.
-
Lean Approach to Automated Machine Tending Delivers Quicker Paths to Success
Almost any shop can automate at least some of its production, even in low-volume, high-mix applications. The key to getting started is finding the simplest solutions that fit your requirements. It helps to work with an automation partner that understands your needs.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.