Video: Music by Modulation
M4 Sciences makes a device that uses modulation-assisted machining to prevent chips from binding during deep drilling. Called “TriboMAM,” the system oscillates the drill in and out of the cut 1,000 times per second.
Share
M4 Sciences makes a device that uses modulation-assisted machining to prevent chips from binding during deep drilling. Called “TriboMAM,” the system oscillates the drill in and out of the cut 1,000 times per second. One of its users is this shop: Alphatec Spine.
Previously, a small problem with this system related to confirming that the unit had activated. At full speed, its operation is not audible. How could the operator be sure it was running? This was indeed a small problem, because M4 Sciences implemented a simple solution: Running at a slower, audible frequency immediately at startup enables the unit to make a sound that users can hear.
This video shows the company taking that solution a little farther. Running at a series of frequencies creates an effect that is not only audible, but recognizeable.
In the video, the TriboMAM unit (making the music) is the cylindrical object in the foreground. The photo below shows the unit in use within a CNC lathe.
Related Content
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Form Tapping Improves Tool Life, Costs
Moving from cut tapping to form tapping for a notable application cut tooling costs at Siemens Energy and increased tool life a hundredfold.
-
Selecting a Thread Mill That Matches Your Needs
Threading tools with the flexibility to thread a broad variety of holes provide the agility many shops need to stay competitive. They may be the only solution for many difficult materials.