Index's G420 Turn-Mill Designed with Ergonomics in Mind
Index’s G420 turn-mill features two identical 3,500-rpm spindles with 315-mm (400-mm optional) chucks as well as a five-axis milling spindle.
Share
Index’s G420 turn-mill features two identical 3,500-rpm spindles with 315-mm (400-mm optional) chucks as well as a five-axis milling spindle. The machine’s stability and dynamic response make it a good choice for working with difficult-to-machine materials such as those used in aerospace, and machining large, complex parts in a single setup, the company says.
The main and counter spindles each accommodate barstock ranging to 102 mm in diameter and can chuck parts ranging to 315 mm in diameter (400 mm optional). The large work area provides space for parts as long as 1,600 mm and incorporates an ergonomic design to optimize operator accessibility. An optional workpiece handling system can be incorporated for loading, unloading and transferring parts weighing up to 20 kg and measuring 120 mm in diameter.
The milling spindle offers 26 kW of power, 150 Nm of torque and 12,000 rpm with an HSK-T63 interface. A Capto C6 option provides 27.5 kW, 100 Nm and 18,000 rpm. Optimized Y/B quill kinematics enable highly productive simultaneous five-axis milling operations to tackle complex geometries, the company says.
Designed as a modular system, the G420 can accommodate up to three tool carrier, each equipped with a Y axis. Turret steady rests are available to ensure maximum stability when machining long parts or shafts.
Ergonomics and flexibility were major considerations when designing the G420, Index says. The goal was to make all relevant components easily accessible to operating and maintenance personnel. A chip conveyor can be mounted to either side of the machine to make optimum use of available floorspace. Automation such as conveyor belts and robot handling units can be integrated to provide additional enhancements to productivity.
Related Content
-
Lean Approach to Automated Machine Tending Delivers Quicker Paths to Success
Almost any shop can automate at least some of its production, even in low-volume, high-mix applications. The key to getting started is finding the simplest solutions that fit your requirements. It helps to work with an automation partner that understands your needs.
-
Inside the Premium Machine Shop Making Fasteners
AMPG can’t help but take risks — its management doesn’t know how to run machines. But these risks have enabled it to become a runaway success in its market.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.