The Value of 3+2
Full-five-axis machining is complex and neat to watch, but five-axis positioning is appealing in its own right.
Share
Positioning in four or five axes can minimize the number of times a part is touched during production.
When you attend shows like (which runs September 12 to 17 this year), you typically see machine tool builders displaying five-axis equipment. Typically, the builders showcase their five-axis technology via simultaneous, choreographed movements of spindle (and/or rotary tables) and complex demo workpieces, such as turbine blisks, blades or impellers. These movements are not only impressive to watch, but are sometimes essential for a given application.
However, as you watch these demos at the show, call to mind some more prismatic, blocky parts you’re currently running across multiple machines. You might not have an application that requires full-five-axis contouring, but you might find value in 3+2, like the two shops mentioned in this article did.
Related Content
-
How to Successfully Adopt Five-Axis Machining
While there are many changes to adopt when moving to five-axis, they all compliment the overall goal of better parts through less operations.
-
How to Determine the Currently Active Work Offset Number
Determining the currently active work offset number is practical when the program zero point is changing between workpieces in a production run.
-
Inverting Turning and Five-Axis Milling at Famar
Automation is only the tip of the iceberg for Famar, which also provides multitasking options for its vertical lathes and horizontal five-axis machine tools.