VTL Delivers Powerful, Heavy Cuts

Published 6/13/2011

VTL Delivers Powerful, Heavy Cuts

In addition to high horsepower and torque for heavy cuts in difficult-to-machine materials, the Powerturn 2500 C-M vertical turning lathe offers a large-capacity ATC, thermal stability and observation cameras mounted within the work zone.

Edited by: Matt Danford

Former Senior Editor, 91��Ƶ��վ��

Shown here is the machine’s tool storage and retrieval system. A two-position tool arm loads and unloads the tools, and the next cutter automatically moves to the “ready” position for faster change times.

The VTL’s table employs a dual-drive system that provides not only high accuracy during C-axis positioning, but also sufficient horsepower and torque for heavy cuts, the company says.

Vertical turning lathes (VTLs) have always been useful for machining large, heavy parts. That’s because gravity helps keep the workpiece in place rather than acting in opposition to the clamping forces exerted by a conventional lathe chuck. By itself, however, this inherent advantage is not sufficient to satisfy the needs of many manufacturers in the energy, construction, marine equipment and other sectors in which these machines are common. Such companies are demanding higher cutting forces for aggressive machining operations that remove large amounts of material.

Toshulin, a VTL builder based in the Czech Republic city of Hulin, says such applications shouldn’t be a problem with its new Powerturn 2500 C-M, even when dealing with hardened, difficult-to-machine alloys. Scheduled for release at the EMO trade show in Hannover, Germany this September, the machine offers a table drive system and ram that deliver high levels of horsepower and torque for heavy hogging. It also offers advancements demanded by machine tool users across all sectors of industry, including features that contribute to thermal stability, automation capabilities that reduce setup time, and a layout that conserves floor space. Additionally, cameras mounted within the workzone enable operators and other personnel to closely track operations as they proceed.

Available in the United States from Pilsen Imports (Cincinnati, Ohio), the machine offers a 98-inch table. C-axis positioning via the table’s dual drive system enables users to orient parts for machining via rotating milling and drilling tools mounted in the square, 12.5-inch ram’s live spindle, which is capable of as much as 11,250 pounds of cutting force.

The table drive system offers 190 hp and 64,400 foot-pounds of torque at continuous duty (more than 237 hp and 85,500 foot-pounds duty rated), while the ram live spindle delivers 68 hp and 1,460 foot-pounds of torque at continuous duty (85 hp and 1,825 foot-pounds duty rated). The company says these levels of power are especially beneficial in helical milling operations. Additionally, the ram is designed to resist bending as it extends, which enables heavy, accurate cutting at high speed regardless of the extension level, the company says.

Complementing the powerful ram system and table drive is a thermo-symmetrically designed machine base that reduces the effects of heat on the table and workpiece. Combined with a recirculating, temperature-controlled oil system, this feature helps maintain a consistent temperature range to mediate any heat-related table inaccuracies. Consistent temperatures also aid in obtaining consistent cutting tolerance bands, the company says.

To reduce time spent loading and unloading cutting tools, the machine’s ATC can accommodate as many as 250 tools. Compatible interfaces include Sandvik Capto, Kennametal KM or HSK for both turning and live tools as well as 50-taper live tools. With the exception of special-sized tools that require a fixed location, all cutters locate in standardized carriers that fit any location on the changer. A two-position tool arm loads and unloads the tools, and the next cutter automatically moves to the “ready” position for
faster change times. The main tool adapters are located in a carousel positioned for easy access by the ram.

The layout of auxiliary components (the electrical cabinet, hydraulic unit, coolant tank and so on) is designed to minimize the machine’s footprint, the company says. Additionally, the guard system keeps chips and coolant inside the fully enclosed workzone to facilitate a clean, safe environment for operators and support personnel.

Toshulin has also added a somewhat unusual capability to the Powerturn 2500 C-M: protected, workzone-mounted cameras that enable users to closely monitor the machining process. These full-color cameras are capable of panning, tilting and zooming as required. Images are displayed on a large screen attached to the operator’s pendant.

Related Content

Five-Axis 24 Jul 2023

Inverting Turning and Five-Axis Milling at Famar

Automation is only the tip of the iceberg for Famar, which also provides multitasking options for its vertical lathes and horizontal five-axis machine tools.

Turn/Mill 27 May 2024

Industry Analysis: Machining Semiconductor Components

With many machine shops anticipating long-term growth in demand from the semiconductor industry, it is worth the time to heed the advice of manufacturers who have already been servicing this end-market for years.

Automation 11 Aug 2023

Inside the Premium Machine Shop Making Fasteners

AMPG can’t help but take risks — its management doesn’t know how to run machines. But these risks have enabled it to become a runaway success in its market.

Turning Machines 10 Jul 2024

Second B-Axis Improves Efficiency of Swiss-Type Machining

A highly stable, fully programmable B-axis on the subspindle of Nomura DS’s 20J3XBTC enables users to more quickly machine complex parts complete.

Top Shops

Last Chance! 2025 Top Shops Benchmarking Survey Still Open Through April 30

Don’t miss out! 91��Ƶ��վ��'s Top Shops Benchmarking Survey is still open — but not for long. This is your last chance to a receive free, customized benchmarking report that includes actionable feedback across several shopfloor and business metrics.

Automation

AMRs Are Moving Into Manufacturing: 4 Considerations for Implementation

AMRs can provide a flexible, easy-to-use automation platform so long as manufacturers choose a suitable task and prepare their facilities.

Top Shops

Machine Shop MBA

Making Chips and 91��Ƶ��վ�� are teaming up for a new podcast series called Machine Shop MBA—designed to help manufacturers measure their success against the industry’s best. Through the lens of the Top Shops benchmarking program, the series explores the KPIs that set high-performing shops apart, from machine utilization and first-pass yield to employee engagement and revenue per employee.

91��Ƶ��վ��

VTL Delivers Powerful, Heavy Cuts

Share

Related Content

Inverting Turning and Five-Axis Milling at Famar

Industry Analysis: Machining Semiconductor Components

Inside the Premium Machine Shop Making Fasteners

Second B-Axis Improves Efficiency of Swiss-Type Machining

Read Next

Last Chance! 2025 Top Shops Benchmarking Survey Still Open Through April 30

AMRs Are Moving Into Manufacturing: 4 Considerations for Implementation

Machine Shop MBA

Country

Industries Served

Operations Performed

Welcome to 91��Ƶ��վ��!

VTL Delivers Powerful, Heavy Cuts

Share

SMW Autoblok Corporation

Featured Content

Featured Videos

CNC Engineering, Inc.

Featured Content

Featured Videos

Heidenhain Corporation

Featured Content

Featured Videos

QualiChem Inc.

Featured Content

Featured Videos

Mikron Corp.

Featured Content

Featured Videos

ZEISS Industrial Quality Solutions

Featured Content

Featured Videos

All World Machinery Supply

Featured Content

Featured Videos

T J Davies, Co., Inc.

Featured Content

Related Content

Read Next

Country

Industries Served

Operations Performed

Welcome to 91��Ƶ��վ��!