How to Apply Color Codes in Your CNC Environment

91��Ƶ��վ��

23 Apr 2025

3 Strategies for Effective CNC Programming Standardization
Automation 22 Apr 2025

3 Trends From PMTS 2025
Data-Driven Manufacturing 21 Apr 2025

Enhancing the Shop Floor with AI
Measurement 18 Apr 2025

Surface Finish Underfoot
Economics 16 Apr 2025

Last Chance! 2025 Top Shops Benchmarking Survey Still Open Through April 30
Turning Machines 15 Apr 2025

“Turning” the Tables: 10 Must-Read Articles to Sharpen Your Lathe Game
Economics 14 Apr 2025

Metalworking Index Reaches Expansion for First Time in 2 Years
Data-Driven Manufacturing 11 Apr 2025

Digital Twin Provides Real-Time Feedback on Part Quality
Automation 9 Apr 2025

AMRs Are Moving Into Manufacturing: 4 Considerations for Implementation
Turn/Mill 7 Apr 2025

Soft Skills Prove a Sharp Edge in Plastics Manufacturing

Published 10/17/2012

How to Apply Color Codes in Your CNC Environment

A color coding system can be a way to simplify complicated tasks as part of a continuous improvement strategy.

Basics

Mike Lynch

Founder and President, CNC Concepts Inc.

Simplifying a task makes it easier and faster to perform. It also minimizes the potential for mistakes. Using color codes is one means of task simplification. Color codes can help graphically illustrate difficult concepts and can simplify complicated tasks; therefore, they should be an important resource in your continuous improvement toolbox.

For example, color coding cutting tool pull studs for the individual machining centers your company owns can help avoid errors. The color coding can keep a setup person or operator from loading a tool that cannot be sufficiently held by the machine, which avoids the risk of the automatic toolchanger mechanism dropping a cutting tool. As tools are loaded, anyone can quickly and easily tell if an assembled cutting tool can be used in that particular machine.

The electronics industry already has a color coding system in place specifically for placing values on resistors. I suggest using this system for any application that requires a number value to be illustrated. Here are the colors related to each number when using this system:

• Black: zero

• Brown: one

• Red: two

• Orange: three

• Yellow: four

• Green: five

• Blue: six

• Violet: seven

• Gray: eight

• White: nine

For values that require more than one digit, you can double up or alternate two or more colors. The colors brown and red can indicate a value of 12 (one and two). The colors orange and blue can indicate 36 (three and six).

Use this number-related color code for the task of identifying which tool offset to use for making an adjustment on a given machined surface. Mark up a print using brown to color the surfaces controlled by offset number one. Use red to color the surfaces controlled by offset number two, orange for surfaces controlled by offset number three, and so on. For two-digit values, I suggest alternating colors on the surfaces. For instance, alternate between brown and red to color surfaces controlled by offset number 12.

In similar fashion, you can color code each gaging device to match the color related to adjustment-offset numbering. A red-coded gage, for instance, will be used to measure red-colored surfaces on the drawing that are controlled by offset number two.

If you need to recolor a device on a regular basis (like the gage in the previous example), you can use colored stick-on dots. The only concern might be getting them to adhere to the device for the entire time it is required.

A color code also can be used to simplify the task of cutting tool and insert replacement. Pick a color and make a visible dot on the tool shank. Use the same color to mark all hand tools (such as hex keys and drivers). When a setup person or operator needs to index an insert, he or she will not have to try three similar looking, yet different sized, hex keys to find the correct one.

For devices that must be assembled, especially when they can be assembled incorrectly, color coding can eliminate guesswork. Simply use one color to mark the end of each component and its mating device.

You can even color code departments within your company. Any device that belongs in a given department can be marked with the department’s color. This makes it easy to tell when something is out of place. Mark routing sheets and raw material to make it easy for workers to tell where things must be routed. Use these colors to graph the productivity of each department to show everyone how their department rates from a productivity standpoint.

When it comes to safety, take a lesson from the color coding used in traffic control. Mark safe areas and devices with green. Mark more hazardous areas and devices with yellow. Mark dangerous areas and devices with red.

Any time you want to simplify a task or minimize the potential for a serious mistake, a color coding system will help you make improvements.

Admittedly, a color code can present problems if anyone in your company cannot identify certain colors. In this case, another method must be found to clarify what needs to be done.

Related Content

Machining Centers 27 Nov 2024

How to Determine the Currently Active Work Offset Number

Determining the currently active work offset number is practical when the program zero point is changing between workpieces in a production run.

Basics 24 May 2023

Custom Workholding Principles to Live By

Workholding solutions can take on infinite forms and all would be correct to some degree. Follow these tips to help optimize custom workholding solutions.

Basics 23 Feb 2024

6 Variations That Kill Productivity

The act of qualifying CNC programs is largely related to eliminating variations, which can be a daunting task when you consider how many things can change from one time a job is run to the next.

Basics 9 Aug 2023

Tips for Designing CNC Programs That Help Operators

The way a G-code program is formatted directly affects the productivity of the CNC people who use them. Design CNC programs that make CNC setup people and operators’ jobs easier.

Automation

AMRs Are Moving Into Manufacturing: 4 Considerations for Implementation

AMRs can provide a flexible, easy-to-use automation platform so long as manufacturers choose a suitable task and prepare their facilities.

Economics

Last Chance! 2025 Top Shops Benchmarking Survey Still Open Through April 30

Don’t miss out! 91��Ƶ��վ��'s Top Shops Benchmarking Survey is still open — but not for long. This is your last chance to a receive free, customized benchmarking report that includes actionable feedback across several shopfloor and business metrics.

Basics

Machine Shop MBA

Making Chips and 91��Ƶ��վ�� are teaming up for a new podcast series called Machine Shop MBA—designed to help manufacturers measure their success against the industry’s best. Through the lens of the Top Shops benchmarking program, the series explores the KPIs that set high-performing shops apart, from machine utilization and first-pass yield to employee engagement and revenue per employee.

91��Ƶ��վ��

How to Apply Color Codes in Your CNC Environment

Share

Related Content

How to Determine the Currently Active Work Offset Number

Custom Workholding Principles to Live By

6 Variations That Kill Productivity

Tips for Designing CNC Programs That Help Operators

Read Next

AMRs Are Moving Into Manufacturing: 4 Considerations for Implementation

Last Chance! 2025 Top Shops Benchmarking Survey Still Open Through April 30

Machine Shop MBA

How to Apply Color Codes in Your CNC Environment

Share

Heidenhain Corporation

Featured Content

Featured Videos

All World Machinery Supply

Featured Content

Featured Videos

QualiChem Inc.

Featured Content

Featured Videos

T J Davies, Co., Inc.

Featured Content

SMW Autoblok Corporation

Featured Content

Featured Videos

ZEISS Industrial Quality Solutions

Featured Content

Featured Videos

Mikron Corp.

Featured Content

Featured Videos

CNC Engineering, Inc.

Featured Content

Featured Videos

Related Content

Read Next