Published
Air-Actuated Collet Chuck
Northfield Precision’s 5C collet chuck is interchangeable with its 4" chucks.
Share
Northfield Precision’s 5C collet chuck is interchangeable with its 4" chucks. The air-actuated chuck uses standard air-feed tubes (wet or dry), and the same bolt pattern as the 4" models. It can run at speeds faster than 8,000 rpm. All components are hardened and ground to 58/3 R.C., and all diameters are ground within 1/10,000 TIR. The chuck uses standard 5C collets.
The company’s air chucks are suited for virtually any lathe, boring machine, grinder or VMC. Models include through-hole, high speed and quick-change. The chuck is available in SAE or metric sizes ranging from 3" to 18" (76 to 457 mm). Accuracies range from 0.001" to 0.00001" (0.254 m).
Related Content
-
PowRgrip Responds to Three Tooling Trends
Rego-Fix’s PowRgrip tooling system has expanded over the past 20 years to incorporate a wider range of tool sizes, as well as automation.
-
Rego-Fix’s Center for Machining Excellence Promotes Collaboration
The new space includes a showroom, office spaces and an auditorium that will enhance its work with its technical partners.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement