Broaching Tool Eliminates Cleaning Process for Serrated Turned Parts
Schwanog’s broaching tool eliminates the cleaning process step when machining serrated turned parts, creating a single-operation approach using a conventional lathe with a C axis.
.jpg;width=70;height=70;mode=crop;format=webp)
Share
Schwanog’s broaching tool eliminates the cleaning process step when machining serrated turned parts, creating a single-operation approach using a conventional lathe with a C axis. The tool has a quarter-circle geometry with six teeth. The first tooth carries a complete finish depth profile, while the remaining five teeth are considered roughing teeth.
Broaching of serration is a two-step process. With the first step, the spindle does not move and the broach feeds three times until the first tooth is completely established. With the second step, the spindle starts indexing and the five successive teeth are continuously broached until the finished depth is reached. The faster production cycles enabled by this system are said to reduce setup times and part cycle times.
Related Content
-
Measuring Torque, Thrust Force for Smart Drilling Operations
To monitor drilling operations for smart manufacturing solutions, torque and thrust force can be measured.
-
Quick-Change Tool Heads Reduce Setup on Swiss-Type Turning Centers
This new quick-change tooling system enables shops to get more production from their Swiss turning centers through reduced tool setup time and matches the performance of a solid tool.
-
Orthopedic Event Discusses Manufacturing Strategies
At the seminar, representatives from multiple companies discussed strategies for making orthopedic devices accurately and efficiently.