Collision Detection System Reacts Quickly to Avoid Crashes
Marposs Corp.’s Brankamp CMS-02 stand-alone system for collision monitoring and crash damage mitigation uses a ceramic strain sensor to detect irregularities in the production process.
Share
Marposs Corp.’s Brankamp CMS-02 standalone system for collision monitoring and crash damage mitigation uses a ceramic strain sensor to detect irregularities in the production process. It measures elastic deformation in the range of 0.1 micron, and both slows and dynamically increases forces with damage potential. It reacts within 1 millisec., sending a stop signal to E-Stop to alleviate or eliminate expensive, time-consuming machine crashes.
The system is a single-channel unit with a 16-bit resolution and a 25-kHz sampling rate. It provides three operation modes with three limits per mode (warning, soft stop and hard stop outputs limits), stop-event data recording and a signal values log file. An Ethernet cable to a Windows-based industrial PC unit or an IPC4-dedicated monitor provides data visualization, analysis and statistics, as well as the human-machine interface (HMI).
The system is designed to be easy to install and it can be retrofitted to existing machines. It supports several communication paths including discrete I/Os, Profibus-DP and Profinet. Operators of all skill levels can benefit without having to attend training courses.
Additionally, the system can be expanded to work in conjunction with the Genior Modular monitoring solution for simultaneous collision detection and process monitoring for visualizing the processes in parallel.
Related Content
-
2 Secondary Coordinate Systems You Should Know
Coordinate systems tell a CNC machine where to position the cutting tool during the program’s execution for any purpose that requires the cutting tool to move.
-
From Tradition to Transformation: Century-Old Manual Machine Shop Adds CNCs
After 122 years of working with manual mills and lathes, this fifth-generation shop acquired assets of a local CNC machining business and hired the owner. Here’s how it’s going a year later.
-
4 Commonly Misapplied CNC Features
Misapplication of these important CNC features will result in wasted time, wasted or duplicated effort and/or wasted material.