Coolant-Through Toolholders Equipped with Dual Ports
GenSwiss Dual Port coolant-through toolholders feature a single coolant feed line and a double-jet design with one port on the front and one on the back.
.jpg;width=70;height=70;mode=crop;format=webp)
Share
GenSwiss Dual Port coolant-through toolholders feature a single coolant feed line and a double-jet design with one port on the front and one on the back. According to the company, the design enables simultaneous delivery of high-pressure cutting oil to the insert tip and an adjacent station, keeping chips out of the cutting zone for optimal lubrication and cooling. In addition, the two ports on a single holder deliver more high-pressure streams without monopolizing feed lines from the high-pressure pump. The holders are designed for pressures ranging to 2,000 psi and are offered in 1/2" and 5/8" square-shank stock sizes. The holders are suitable for use with 80- and 55-degree Utilis inserts in CCMT/CCGT and DCGT/DCMT styles, respectively, as well as other Swiss-type cutting tools.
Related Content
-
PowRgrip Responds to Three Tooling Trends
Rego-Fix’s PowRgrip tooling system has expanded over the past 20 years to incorporate a wider range of tool sizes, as well as automation.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Making the Most of Mixed Toolholder Assemblies
While nearly all ER systems will have cross compatibility, they’ll have small differences across manufacturers that make their implementation at the shop level not as standard.