Video: Trial Cuts with Ultrasonic-Assisted Machining
Ultrasonic-assisted machining reduces friction in metal cutting to enable a standard tool to cut faster and more smoothly. Video shows comparison cuts of the same machine and tool with and without this new accessory.
Share
A video created by Acoustech Systems includes footage of holes being drilled with and without ultrasonic-assisted machining. This company’s newly developed system is essentially a toolholder that has ultrasonic actuation built in. Adding this toolholder to the process can actually increase a shop’s machining capacity, because standard machines and tools can cut faster thanks to the friction reduction that the ultrasonic effect achieves. Learn more about ultrasonic-assisted machining in this article.
Related Content
-
Briquetting Manufacturer Tools Up for Faster Turnaround Times
To cut out laborious manual processes like hand-grinding, this briquette manufacturer revamped its machining and cutting tool arsenal for faster production.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
How to Accelerate Robotic Deburring & Automated Material Removal
Pairing automation with air-driven motors that push cutting tool speeds up to 65,000 RPM with no duty cycle can dramatically improve throughput and improve finishing.