Share
This line of ER mini-nut holders is designed for applications where clearance is a consideration. Nut diameters range from 0.63" to 1.02" (16 to 28 mm) to permit machining where standard ER nuts cannot fit. ER11, ER16 and ER20 sizes are available for CAT40, CAT50, BT30 and BT40 spindles. The mini-nut holders are manufactured to extend perishable cutting tool life and improve CNC machine performance, the company says, noting that each taper is precision ground to exceed AT3 industry standards. Maximum TIR (runout measured from the outside of taper to the inside of collet pocket) is said to be 0.0001". The holders are factory balanced to 18,000 rpm at G2.5.
Related Content
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Making the Most of Mixed Toolholder Assemblies
While nearly all ER systems will have cross compatibility, they’ll have small differences across manufacturers that make their implementation at the shop level not as standard.
-
Ceratizit's Updated Tooling Solutions Improve Machining Performance
The company has upgraded its EcoCut indexable inserts lineup, as well as introduced two new toolholding and workholding solutions.