Gundrilling Machine Features Two Independent Spindles
PMTS 2017: The Eldorado M30-30T from Kays Engineering is a twin-spindle gundrilling machine with independent spindle control enabling the machine to perform two independent drilling cycles at the same time.
Share
The Eldorado M30-30T from Kays Engineering is a twin-spindle gundrilling machine with independent spindle control enabling the machine to perform two independent drilling cycles at the same time. A separate 6.5" (165-mm) full-color control screen is installed on both sides of the machine to enable the operator to take full advantage of the independent spindle flexibility.
The M30-30T has a 5/16" (8-mm) diameter drilling capacity and a 30" (762-mm) maximum drilling depth. It features precision-ground ballscrews and high-speed cartridge spindles to improve drilling performance. The machine also incorporates flame-hardened and ground cast iron box ways and hand-scraped spindle housings (instead of linear guideways and milled surfaces). This results in superior vibration damping, extended tool life, and improved hole accuracy and surface finish.
Related Content
-
Translating a Prototyping Mindset to Production
The experimental mindset that benefited BDE Manufacturing Technologies as a prototype job shop has given it an adaptable edge as a production facility.
-
Weingärtner Maschinenbau HMC Provides Stable Machining
The MPMC features a wide base, optimized guide ratio and configuration of the guideways to provide stability and prevent vibration during operation, even under extreme cutting conditions.
-
Large-Format Machining Simplifies Tube Manufacturing
Downtime is the enemy of efficient manufacturing — a problem FIBA Technologies has addressed through purchasing a Soraluce FLP 14000.