Heidenhain Touch Probe Offers High Speeds and 3D Accuracy
Heidenhain’s TS 760 touch probe offers 1 µm accuracy while keeping compatibility with the TS 740 and providing the same additional data as the TS 460.
Share
Photo courtesy of Heidenhain
Heidenhain’s TS 760 touch probe offers 3D accuracy to within 1 µm and homogeneous switching behavior over 360 degrees. The company says the probe’s 1 m/min feed rate is four times faster than other products offering repeatability equal to or within 0.25 µm at two standard deviations.
The touch probe’s low, ≈0.2 N of trigger force and ≈1.5 N of axial force limit form and surface damage to fragile parts. Users can also clean the probing point with an integrated flusher feature that uses compressed air and cooling lubricant of up to 60 bars. Functionally, the probe is fully compatible with the TS 740 and provides the same additional data as the TS 460.
An SE 661 transceiver with an EnDat communication signal sends collected data over radio or infrared channels to Heidenhain’s contouring TNC or other major CNC controls.
Related Content
-
Help Operators Understand Sizing Adjustments
Even when CNCs are equipped with automatic post-process gaging systems, there are always a few important adjustments that must be done manually. Don’t take operators understanding these adjustments for granted.
-
The Many Ways of Measuring Thickness
While it may seem to be a straightforward check, there are many approaches to measuring thickness that are determined by the requirements of the part.
-
4 Ways to Establish Machine Accuracy
Understanding all the things that contribute to a machine’s full potential accuracy will inform what to prioritize when fine-tuning the machine.